BULK FILER

The unit is basically constructed of 1mm cold rolled steel. he rest of the
components are made of a minimum of 1mm steel , which are epoxy
powder coated. The units are made up of solid metal side panels, top &
bottom shelves and f
ull or half back panels. Cabinets are in knock-down form for ease of
transport, assembly and relocation. The totally independent floor base is
made of a rectangular tube structure 75mm x 50mm x 2mm which is
braced with 38mm x 38mm x 2mm steel tubes. T
his is then fitted with an 18mm bison board floor and cord Ozite
carpet.The trolleys are made from 50mm x 25mm x 2mm tubing
and flat bar brackets for the wheels. These are then guided with the
sealed bearings whic
h run on the inside of the base. The wheels are made with a convex
shape to prevent tracking an
d are fitted with sealed bearings allowing for a load of up to 1800kg
(Note: a maximum of 960k
g is required for office use) The sealed self-lubricating ball-bearings are
covered with ste
el tyre, and run on a high carbon steel track, reducing wear and friction
on the metal tack. The top structure (cabinets) is designed to use the
minimum components, ie. multiple side, top/bottom and back panels.
These components are ma
de from 1mm cold rolled steel and powder coated to a minimum of 70
micron thickness. Maximum floor loading per square meter of empty
units is up to 120kg per bay. The maximum load per square meter of a
fully loaded unit is 685
kg. SECURITY.Each set of cabinets has a lock box at the end of the unit
which locks into the base floor as well as at the top of the cabinet with
lock bars operating inside the lock box. ndividual cabinets and
components can be locked off separately allowing the rest of the unit to
be accessed, while keeping certain areas secure. GUARANTEE All
equipment manufactured has a FIVE year guarantee on ormal use. ie
Bearings, paint and slides

Compare
Category:

Description

The unit is basically constructed of 1mm cold rolled steel. he rest of the
components are made of a minimum of 1mm steel , which are epoxy
powder coated. The units are made up of solid metal side panels, top &
bottom shelves and f
ull or half back panels. Cabinets are in knock-down form for ease of
transport, assembly and relocation. The totally independent floor base is
made of a rectangular tube structure 75mm x 50mm x 2mm which is
braced with 38mm x 38mm x 2mm steel tubes. T
his is then fitted with an 18mm bison board floor and cord Ozite
carpet.The trolleys are made from 50mm x 25mm x 2mm tubing
and flat bar brackets for the wheels. These are then guided with the
sealed bearings whic
h run on the inside of the base. The wheels are made with a convex
shape to prevent tracking an
d are fitted with sealed bearings allowing for a load of up to 1800kg
(Note: a maximum of 960k
g is required for office use) The sealed self-lubricating ball-bearings are
covered with ste
el tyre, and run on a high carbon steel track, reducing wear and friction
on the metal tack. The top structure (cabinets) is designed to use the
minimum components, ie. multiple side, top/bottom and back panels.
These components are ma
de from 1mm cold rolled steel and powder coated to a minimum of 70
micron thickness. Maximum floor loading per square meter of empty
units is up to 120kg per bay. The maximum load per square meter of a
fully loaded unit is 685
kg. SECURITY.Each set of cabinets has a lock box at the end of the unit
which locks into the base floor as well as at the top of the cabinet with
lock bars operating inside the lock box. ndividual cabinets and
components can be locked off separately allowing the rest of the unit to
be accessed, while keeping certain areas secure. GUARANTEE All
equipment manufactured has a FIVE year guarantee on ormal use. ie
Bearings, paint and slides

Reviews

There are no reviews yet.

Be the first to review “BULK FILER”

Your email address will not be published. Required fields are marked *